Tavole rotanti per carichi pesanti

Per le animazioni dei punti vendita che richiedono potenza, la D4D propone delle piattaforme girevoli molto robuste di vario tipo, in grado di sostenere carichi da 1 a 3 tonnellate.
Queste soluzioni sono particolarmente adatte per mettere in moto i veicoli nei saloni dell’auto.

Heavy Duty Turntable STO 1

Présentation

Heavy duty turntable for maximum centric load of 1,000 kg. Strong welded construction. Powerful tapered roller bearing to support against big bending power for large installations.
Only for horizontal use.
Indoor and outdoor operation.
Especially applicable for trade shows, indoor / outdoor advertising signs and logos/studio and stage areas.

Super Silent Version available especially for noiseless environment.

Please note the difficult conditions for outdoor use and ask whether the turntable is suitable for your property and installation location.

Options for both Turntables

  • Speed regulation by Frequency Converter
  • Rotation direction: counterclockwise (ccw)
  • Switch for changing rotation direction
  • On request: special functions like reversing operation, cycle operation, stop times, soft start and soft stop.

Available as rental turntable also
Remark: For all our dimensions and weight specifications the common tolerances are valid.

Data: Type with friction wheel

Caracteristiques

  • Maximum centric load: 1,000 kg / 2,200 lbs
  • Size of turn plate: 660  x 660 mm
  • Reference diameter of bore holes: 800 mm
  • Diameter of bore holes: 13 mm
  • Pedestal: 660 x 660 mm
  • Total height of turntable: 200 mm
  • Dead weight: 96 kg
  • Rotating speed: 1.2 rpm
  • Rotation direction: clockwise (cw)
  • Operating voltage: 220-240 V AC
  • Asynchronous Gear Motor, power consumption <100 W
  • Slip ring for up to 20 A with separate power cord
  • Power cord: 2 m with “Schuko”-plug
  • Adjustable friction wheel
  • Safety clutch
  • Outdoor operation possible: Protection class IP x3

Options

Particularités

Data: Type Super Silent with belt drive

Caracteristiques

  • Maximum centric load: 1,000 kg / 2,200 lbs
  • Size of turn plate: 660  x 660 mm
  • Reference diameter of bore holes: 800 mm
  • Diameter of bore holes: 13 mm
  • Pedestal: 660 x 660 mm
  • Total height of turntable: 190 mm
  • Dead weight: 104 kg
  • Rotating speed: 1.0 rpm
  • Rotation direction: clockwise (cw)
  • Operating voltage: 220-240 V AC
  • Asynchronous Gear Motor, power consumption <150 W
  • Slip ring for up to 16 A with separate power cord
  • Power cord: 2 m with “Schuko”-plug
  • Adjustable belt drive
  • Safety clutch
  • Outdoor operation possible: Protection class IP x3

Please note that these turntables are made to order and are manufactured by our partner who has been manufacturing these drives for over 50 years. Test and approval documents have to be ordered separately and are associated with additional costs of the test laboratories.

Options

Particularités

Heavy Duty Turntable STO 1.5 / STO 2.0

Caractéristiques
  • Maximum centric load: 1,500 kg – 3,300 lbs / 2,000 kg – 4,400 lbs
  • Turn plate: Ø 980 mm
  • Pedestal: 860 x 860 mm
  • Total height of turntable: 205 mm
  • Dead weight: approx. 100 kg
  • Rotating speed: 1.0 rpm
  • Rotation direction: clockwise (cw)
  • Operating voltage: 220-240 V AC
  • Asynchronous Gear Motor, power consumption <150 W
  • Slip ring for up to16 A (by request with separate power cord with “Schuko”-plug)
  • Power cord: approx. 2 m with “Schuko”-plug

Présentation

Heavy duty turntable for maximum centric load of 1,500 kg or 2,000 kg. Strong welded construction. Powerful tapered roller bearing to support against big bending power for large installations.
Only for horizontal use.
Indoor and outdoor operation.
Especially applicable for trade shows, indoor / outdoor advertising signs and logos/studio and stage areas.
Slip ring embedded and protected inside or at the edge of the rotating platform.
Please note the difficult conditions for outdoor use and ask whether the turntable is suitable for your property and installation location.

Options for both Turntables

  • Speed regulation by Frequency Converter
  • Rotation direction: counterclockwise (ccw)
  • Switch for changing rotation direction
  • On request: special functions like reversing operation, cycle operation, stop times, soft start and soft stop.

Remark: For all our dimensions and weight specifications the common tolerances are valid.

Options
  • Speed regulation by Frequency Converter (relation 1:10) 
  • Rotation direction: counterclockwise (ccw)
  • Switch for changing rotation direction
  • On request: special functions like reversing operation, cycle operation, stop times, soft start and soft stop.

Please note that these turntables are made to order and are manufactured by our partner who has been manufacturing these drives for over 50 years. Test and approval documents have to be ordered separately and are associated with additional costs of the test laboratories.

Particularités
  • Belt drive adjustable
  • Safety friction clutch
  • Outdoor operation: protection class IP 53

Heavy Duty Turntable STO 3

Caractéristiques
  • Maximum centric load: 3,000 kg / 6,600 lbs
  • Turn plate: Ø 1,250 mm
  • Total height of turntable: 230 mm
  • Dead weight: approx. 400 kg
  • Rotating speed: adjustable by Frequency Converter (FC)
  • Rotation direction: clockwise (cw) or counter clockwise by FC
  • Operating voltage: 220-240 V AC
  • Asynchronous Gear Motor, power consumption <200 W
  • Slip ring for up to16 A (by request with separate power cord with “Schuko”-plug)
  • Power cord: approx. 2 m with “Schuko”-plug

Présentation

Heavy duty turntable for maximum centric load of 3000 kg. Strong welded construction. Big rotary joint (Ø 800 mm) for large installations and high bending power. Only for horizontal use. Indoor and outdoor operation. Especially applicable for trade shows, indoor / outdoor advertising signs, logos and as car turntable.

The diameter of the revolving stage can be enlarged with extension bars by 2,750 mm for large sized requirements. Especially applicable for trade shows, indoor / outdoor advertising signs and logos/studio, stage areas and as car turntables. 

Slip ring connection embedded and speed control by frequency converter.

Remark: For all our dimensions and weight specifications the common tolerances are valid.

Options
  • 12 extension bars for diameter up to 4,000 mm
  • On request: special functions like reversing operation, cycle operation, stop times, soft start and soft stop.

Please note that these turntables are made to order and are manufactured by our partner who has been manufacturing these drives for over 50 years. Test and approval documents have to be ordered separately and are associated with additional costs of the test laboratories.

Particularités
  • Belt drive adjustable
  • Safety friction clutch
  • Very low noise
  • Outdoor operation: protection class IP 53
Documentation request

    Demande de documentation